Specification:| Brand | Jordan&Judy |
| Material | Silicone |
| Capacity | 300ml |
| Water injection temperature | 80℃ |
| Holding time | 3-5h |
| Microwave heating time | Less than 3 min |
| Size | 172.5 x 112 x 47mm |
| Weight | 203g |
Features:
-40℃~80℃ silicone material, microwave heating.3 minutes for quick heating, high temperature resistance.
Hot and cold dual-use.
Safety leak proof.
Long insulation time.Package Includes:
1 x Hot water bag
1 x Bear cover
1 x Ordinary cover
1 x Knitted sheath
1 x Manual
Water injection method:
1. Three-quarters of 80 ° C hot water
2. Exhaust excess air and close the lid
Microwave heating method:
1. The insulation bag should be filled with cold water (must be filled)
2. Put it in a microwave oven and adjust the power to below 1500W. Do not heat it for more than 3 minutes.
Please Note:
1. Remove the knitted cover before putting it in the microwave oven
2. The belt must be filled with cold water to prevent the empty bag from bursting.
3. The heating power of the microwave oven cannot exceed 1500W
4. It is also necessary to calculate the time for heating again, do not time out
5. If there is any abnormality such as expansion during heating, please stop heating immediately
